icon_CloudMgmt icon_DollarSign icon_Globe icon_ITAuto icon_ITOps icon_ITSMgmt icon_Mainframe icon_MyIT icon_Ribbon icon_Star icon_User icon_Users icon_VideoPlay icon_Workload icon_caution icon_close s-chevronLeft s-chevronRight s-chevronThinRight s-chevronThinRight s-chevronThinLeft s-chevronThinLeft s-trophy s-chevronDown
BMC Contact Options

Select the link below that best matches your interest.

For questions about BMC products, solutions, and services, you can also phone the number below:


Here we explain some of the most common Hadoop administrative tasks. There are many, so we only talk about some of the main ones. The reader is encouraged to consult the Apache Hadoop documentation to dig more deeply into each topic.

As you work through some admin commands and tasks, you should know that each version of Hadoop is slightly different. They tend to change some of the command script names. In this example we are using Hadoop 2.7.3.

You will need a Hadoop cluster setup to work through this material. Follow our instructions here on how to set up a cluster. It is not enough to run a local-only Hadoop installation if you want to learn some admin tasks.

Common admin tasks

Here are some of common admin tasks:

  • Monitor health of cluster
  • Add new data nodes as needed
  • Optionally turn on security
  • Optionally turn on encryption
  • Recommended, but optional, to turn on high availability
  • Optional to turn on MapReduce Job History Tracking Server
  • Fix corrupt data blocks when necessary
  • Tune performance

We discuss some of these tasks below.

Turn on security

By default Hadoop is set up with no security. To run Hadoop in secure mode each user and service authentications with Kerberos.  Kerberos is built into Windows and is easily added to Linux.

As for Hadoop itself, the nodes uses RPC (remote procedure calls) to execute commands on other servers. You can set dfs.encrypt.data.transfer and hadoop.rpc.protection to encrypt data transfer and remote procedure calls.  

To encrypt data at rest the admin would need to set up an Encryption Key, HDFS Encryption Zone, and Ranger Key Manager Services together with setting up users and roles.

Hadoop web interface URLs

The most common URLs you use with Hadoop are:

NameNode http://localhost:50070
Yarn Resource Manager http://localhost:8088
MapReduce JobHistory Server http://localhost:19888

These screens are shown below.

NameNode Main Screen

Yarn Resource Manager

MapReduce Job History Server

Configure high availability

High Availability sets two two redundant NameNodes in an Active/Passive configuration with a hot standby. Without this, if the NameNode crashes the the cluster cannot be used until the NameNode is recovered. With HA the administrator can fail over to the 2nd NameNode in the case of a failure.

Note that the SecondaryNameNode that runs on the cluster master is not a HA NameNode server. The primary and secondary NameNode servers work together, so the secondary cannot be used as a failover mechanism.

The set up HA you set dfs.nameservices and dfs.ha.namenodes.[nameservice ID] in hdfs-site.xml as well as their IP address and port an mount an NFS directory between the machines so that they can share a common folder.

You run administrative commands using the CLI:

hdfs haadmin

MapReduce job history server

The job history MapReduce server is not installed by default. The configuration and how to start it is shown below.

cat /usr/local/hadoop/hadoop-2.7.3//etc/hadoop/mapred-site.xml

Start the MapReduce job history server with the following command:

$HADOOP_HOME/sbin/mr-jobhistory-daemon.sh --config 
$HADOOP_HOME/etc/hadoop start historyserver
starting historyserver, logging to 

And query it like this:

curl http://localhost:19888/ws/v1/history/info

{"historyInfo":{"startedOn":1492004745263,"hadoopVersion":"2.7.3","hadoopBuildVersion":"2.7.3 from baa91f7c6bc9cb92be5982de4719c1c8af91ccff by root source checksum 2e4ce5f957ea4db193bce3734ff29ff4","hadoopVersionBuiltOn":"2016-08-18T01:41Z"}}

Or just login to the webpage.

Add datanode

You can add a datanode without having to stop Hadoop.

The basic steps are to create the Hadoop user and then configure ssh keys with no passcode so that the user can ssh from one server to another without having to enter a password. Update the /etc/hosts files to add the hostname to all the machines in the cluster. Then you zip up and copy the entire $HADOOP_HOME directory on the master to the same target machine in the same directory.

Then you add the new datanode to $HADOOP_HOME/etc/hadoop/slaves.

Then run this command on the new datanode:

hadoop-daemon.sh --config $HADOOP_CONF_DIR --script hdfs start datanode

Now you should be able to see it show up when you print the topology:

hdfs dfsadmin -printTopology (hadoop-slave-1) (hadoop-slave-2)

Run Pig Mapreduce job

Here is a Pig script you can run to generate a MapReduce job so that you can have a job to track. (If you do not have pig installed you can refer to http://www.bmc.com/guides/hadoop-apache-pig.html)

First create this file sales.csv

New York,Earl,40000

You can copy the file onto itself multiple times to create a very large file so you will have a job that will run for a few minutes.

Then copy it from the local file system to Hadoop.

hadoop fs -copyFromLocal /data

Check that it is there:

hadoop fs -cat /user/sales.csv

Run Pig. Pig with no command line options runs Pig in cluster (aka MapReduce) mode.

Paste in this script:

a = LOAD '/data/sales.csv' USING PigStorage(',') AS (shop:chararray,employee:chararray,sales:int);

Dump a
Describe a

b = group a by employee;

results = FOREACH b generate SUM(a.sales) as sum, a.employee;

Then you can check the different screens for job data.

Common CLI commands

Stop and start Hadoop. start_dfs.sh start_yarn.sh
Format HDFS. $HADOOP_HOME/bin/hdfs namenode -format
Turn off safe mode. hadoop dfsadmin -safemode leave
List processes. jps
Namenode jobs:
26961 RunJar
28916 SecondaryNameNode
24121 JobHistoryServer
29403 Jps
28687 NameNode
29135 ResourceManager

Datanode jobs;
4231 Jps
3929 DataNode
4077 NodeManager
Corrupt data blocks. Find missing blocks. hdfs fsck /

Monitoring health of nodemanagers

yarn.nodemanager.health-checker.script.path Script path and filename.
yarn.nodemanager.health-checker.script.opts Command line options.
Command line options. Run frequency
checker.script.interval-ms Timeout.

Other common admin tasks

Setup log aggregation.
Configure rack awareness.
Configure load balancing between datanodes.
Upgrade to newer version.
Use cacheadmin to manage Hadoop centralized cache.
Take snapshots.
Configure user permissions and access control.

Common problems

It is not recommended to use localhost as the URL for the Hadoop file system on the localhost. That will cause it to bind to instead of the machine’s routable IP address. Then in Pig you will get this error:

pig java.net.connectexception connection refused localhost:9000

So set the bind IP address to in etc/hadoop/core-site.xml:


WebAppProxy server

Setting up the WebAppProxy server is a security issue. You can use it to set up a proxy server between masters and slaves. It blocks users from using the Yarn URL for hacking. The Yarn user has elevated privileges, which is why that is a risk. It throws up a warning is someone accesses it plus it strips cookies that could be used in an attack.

Where to go from here

The user is encouraged to read further the topics mentioned in this doc and in particular in the Other Common Admin Tasks section as that is where they are going to find tuning and maintenance tools and issues that will certain become issues as they work to maintain a production system and fix all the associated problems.

Explore other BMC Guides ›

Share on Social Media

BMC Solutions for Hadoop & Big Data

Control-M for Big Data

Realize the benefits of big data faster

Learn More | Free Trial

Control-M Application Integrator

Automate the critical workloads that power your business

Learn More

TrueSight Capacity Optimization for Hadoop

Plan and optimize Hadoop IT infrastructure resources

Learn More | Free Trial

BMC Discovery (formerly ADDM)

Identify and model your complete big data infrastructure

Learn More | Free Trial